SEAL YOUR VENTS 99.9% AIR-TIGHT WITH VANITY VENTS INSULATION BLOCKS !!!

Make your Vents Pretty with Vanity Vents Vent Covers – 5 Colors !!!

It’s like putty jewelry on your home…

Vanity Vents Insulation Blocks do a complete job all by themselves. If you want that luxury touch with instant curb appeal then add Vanity Vents Vent Covers – available in 5 colors.

How to Install Your New Vent Insulation Block Inserts – Fast and Easy

Step 1:  Clean your vent openings… either brush them out with a broom/brush OR Blow them out with a leaf blower… wipe down with wet towel to clean as needed.

Step 2: Push closed the plastic vent cover that you may or may not have inside the vent openings. Typically there is a plastic flap that needs to be pushed closed… just please push on either of the top corners and the plastic flap will snap closed.

Step 3:  Simply, grasp the Insulation Block and insert it into one side of the vent opening (from the exterior of the building). The Insulation Block only fits one way… it will push in easily with the long side of the block on top. Push it all the way to the back.

You are done… Use your Blocks in the Cold weather AND the hot weather… it just makes sense.

Vanity Vent Insulation Blocks material is truly a long-term solution:

  • Our Insulation Blocks are CNC Custom Cut with high quality precision to fit perfectly in your foundation crawl space vent openings.
  • Vanity Vent Insulation Blocks material is proven durable, lightweight, resilient, highly resistant to moisture because it has impermeable thick cellular walls. The special material is characterized by its high compressive and tensile strength, fatigue resistance, and low thermal shrinkage and won’t mold, rot or mildew.
  • Used in the marine industry, our material is a closed cell, high density foam that meets or exceeds Military grade requirements.
  • Service Temperature °F -30 to 180.
  • Our Insulation Blocks are CFC Free, Ozone Friendly and 100% Recyclable. Not classified for hazards to the environment.
  • 100% Designed and Manufactured in America, and The Classy Charcoal Black color is very, very attractive!

Note: Custom sizes are available (contact info@vanityvents.com or call 503.548.7444).

2-inch Thick Insulation Blocks are Fabulous.  The 2-inch Vanity Vent Insulation Blocks are the Luxury version of crawl space protection… estimated useful life in the industry is at least 10 years and often much, much longer. The primary benefit of the 2-inch version is Double the Insulation!  Up to R Value R14 when combined with Vanity Vents.

Fine Print: The R-value of closed-cell foam estimated to be R-6.5-7 per inch. Contractors often use it to insulate under slabs, ceilings, walls, and roofs. It performs better than other insulation types. Typical recommendations for exterior walls are R-13 to R-23.  Vanity Vent Insulation Blocks are 2 inches thick for a R Value estimated to be up to 13-14.

Disclaimer

Our foam is cut via CNC to meet the measurements provided in this listing. There is a tolerance in the foam thickness of +- 1/8 of an inch. This is normal for foam. If your project requires exact thickness measurements please consider purchasing a small quantity to test for your project requirements.

All values reported are typical values. We cannot guarantee the applicability or the accuracy of this information or the suitability of the product for any particular purpose. This product is sold without warranty, expressed or implied. (Unless stated otherwise.) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.

By using Vanity Vents products you are reducing your carbon footprint, reducing energy consumption and saving on utility bills.